BRUSTOR B300XL, Mounting Instructions, Page: 6 / 26

OL-B300-04
Pole Support
Floorplate 20x20
Groundanchor
Electrical
supply
SINGLE POLE
COUPLING POLE
2. PLACING THE VERTICAL POLES
› Remove the Pole supports from the vertical poles, also remove the premounted screenguides, and the reinforcement (1)
› Attach the pole supports or floorplates onto the floor.
› Check the dimenions from the previous page again, before fastening the bolts.
› Place the vertical pole over the supports.
› Make sure that the pole is mounted perfectly vertical.
› If necessary fill up the bumps.
› One of the poles contains the electrical supply for the louvremotor and, possibly, the led lights.
Make sure this pole is placed on the right position (according to your order).
3. MOUNTING THE CROSS MEMBERS
› In case of wallfixation, screw the short poles on to the side of the cross members.
› For a coupled unit prepare the junction part, as shown on the drawing below.
› Hook the cross members on to the walladapter.
1
2 x 4 DIN7504K 6.3x50
Coupling pole
Threaded rod M6x130
DIN 934 M6
washer DIN 125 M6
Single pole