background image

3

 

LED Pin Lighting

Safety

Notes aNd WarNiNg

Throughout this publication, “Warnings” and “Cautions” (accompanied by one of the International HAZARD 

Symbols) are used to alert the mechanic to special instructions concerning a particular service or operation that 

may be hazardous if performed incorrectly or carelessly.  They are defined below.

  OBSERVE AND READ 

THEM CAREFULLY!

These “Safety Alerts” alone cannot eliminate the hazards that they signal.  Strict compliance to these special 

instructions when performing the service, plus training and “Common Sense” operation are major accident 

prevention measures.

 

 

NOTE or IMPORTANT!:

 

 

Will designate significant informational notes.

 

  WARNING!  

  

Will designate a mechanical or nonelectrical alert which could potentially cause 

personal injury or death.

 

WARNING!

 

  

Will designate electrical alerts which could potentially cause personal injury or death.

 

CAUTION! 

  

Will designate a mechanical or nonelectrical alert which could potentially cause 

product damage.

  Will designate grounding alerts.

Summary of Contents for led pin light



























Reviews: