23
LED Pin Lighting
To operate the controller, use the + and – buttons to switch programs. When a program is active, it will con-
tinue to run until the controller box is unplugged or a different program is selected. By default, the controller
will operate program 01 when it is turned on. Refer to
Figure 15.
Figure 15
setting the address of the led Pin light
Each light has 10 dip switches used to create a unique address for the light. Switches 1-9 are used to set the
unique address for each light. Switch 10 is used to enable the light for DMX operation. To set a switch to the
ON position, push the switch toward the number. Push the switch away from the number to set the switch to
the OFF position. Refer to
Figure 16.
Figure 16
