NOTES FOR ASSEMBLY
General notes for setup
The assembly instructions provide general guidelines for assembling your ray table.
· The described workflows are to be observed for all table variants and designs.
· The assembly tools suggested are simply recommendations from Brunner GmbH.
· Only the materials supplied may be used for assembly.
· Brunner GmbH accepts no liability for damage caused during assembly.
Design of the leg | Notes for assembly
8 . 9
Assembly tools for ray table
· Cordless screwdriver with hexagon insert, size 4; size 5; size 6
· Hexagon spanner, size 4; size 5; size 6
· Plastic hammer
