Brunner I048140, Assembly Instructions Manual

Page: 16 / 21

16 Assembly instructions Support frame for suspended fireplaces (1.0) © 2015 Brunner GmbH
- Put the door frame in place and provide for
necessary support
Preparation: The mounting aid screws 31 ( see
Illustr. 20 ) must be removed from the fireplace in-
sert.
Top door frame (
see Illustr. 18 - 20) must rest on-
to the sides/back of door frame (11). The frontal
bend of the top door frame should be positioned
behind the covering panel (
see Illustr. 23 ). Jack
up the top door frame in front ( see Illustr. 24 ) and
attach to the insert with screws - use screws 31
on both sides.
Illustr. 22: Door frame in
place and attached with
screw 31 as mounting aid
Illustr. 23: Detail M
Illustr. 24: Jacking up the top
door frame
- Provide suspension
Threaded rods ( see Illustr. 19 - 32) must be shortened to desired length;
combine the turnbuckles with hooks (33+34) and attach at suspension
points (42).