ELECTRIFICATION AND CABLING
HORIZONTAL AND VERTICAL CABLE ROUTING
There is a black anodised cable duct made of high-grade aluminium for horizontal cable routing under the table top. These
can be affixed and removed conveniently, without tools, in a matter of just a few steps. A polished, chrome-plated cable
cover can be used for vertical cable routing. The polished, chrome-plated cable cover routes cables along the column right
to the base of the table frame. Visually, this ideally matches the chrome-plating of the frame.
Foldable cable ducts
When ordering a flexible cable duct, the table
tops are supplied with two plastic strips, which
are recessed in the table top. The cable duct is
easily positioned in the four points. The four wing
fittings can now be tightened manually by turning
clockwise, to secure the cable duct to the table
top. To remove the cable duct, the bars are easily
reopened by turning anti-clockwise. This process
also has no need of tools.
Chrome-plated cable cover
A chrome-plated cable cover is used for vertical
cable routing, which routes the cables from the
cable duct or clamp brackets at the table leg,
vertically to the floor. After placing the cables within
the cover, it is fastened to the table using strong
magnets, without the need for any tools.
