ASSEMBLY INSTRUCTIONS
Assembly instructions
4 . 5
Assembly step 3
If you have assembled multiple individual tables
and placed them on the legs, you can connect them
to the matching table tops (with the connecting
points on the edge). To do so, position the table
top's connecting point on the corresponding T-leg
brackets (while open) and close both levers to
secure the table top.
Create your required table formation using the right
table top formats, in line with your ideas.
To make small adjustments to the table tops, both
levers must be slightly opened on the table top you
wish to move. After adjusting the table top, close
the lever to lock the table in the desired position.
Important note
Table tops with recessed connecting points, which
do not extend to the edges, can only be used
as individual tables or as end tables and are not
suitable for connecting multiple table elements
using one T-leg.
