manualshive.com logo in svg

BRUEL & KJAER VIBROPORT 80, Translation Of The Original Operating Instructions, Page: 52 / 131

Share
Download
BRUEL & KJAER VIBROPORT 80 Translation Of The Original Operating Instructions Download Page 52

Translation of the Original Operating Instructions

VP-80/VP-80 E

45

Mount the card slot cover and lock it with the two holding 
screws.

You have inserted the SD storage card.

6.2

Connecting the VIBROPORT 80 to the PC

6.2.1 Connecting via the USB interface

Connect the VIBROPORT 80 to a PC as follows:

Directly via the USB connection:

Insert the Y-cable (AC-1389) into the USB DEV / TRIG / 
PWR input of the VP-80.

Connect the power supply module to the socket (optional).

Plug the USB connection into the PC.

Data exchange with the PC can begin.

Via the docking station:

Place the VP-80 in the docking station.

Connect the docking station to the socket by means of the 
power supply module (optional).

Connect the docking station and the PC using the USB 
cable provided.

Data exchange with the PC can begin.

Summary of Contents for VIBROPORT 80




































































































































Reviews:

No comments