manualshive.com logo in svg

BRUEL & KJAER VIBROPORT 80, Translation Of The Original Operating Instructions, Page: 20 / 131

Share
Download
BRUEL & KJAER VIBROPORT 80 Translation Of The Original Operating Instructions Download Page 20

Translation of the Original Operating Instructions

VP-80/VP-80 E

13

Tab. 2 Overview of sensors defined by ATEX / IECEx

WARNING!
Explosive atmosphere!

The VIBROPORT 80

E

 has been exclusively designed for 

connection to a defined group of sensors approved for explo-
sive atmospheres.

The use of other, non-approved sensors in explosive atmos-
pheres can cause explosions, resulting in damage to property 
and injuries.

•

Therefore only use the approved sensors in explosive 
atmospheres: We recommend the sensors manufactured 
by Brüel & Kjær Vibro GmbH, as specified in the table 
below.

Manufac-

turer

Model

Certificate

Brüel & 

Kjær Vibro 

GmbH

8326x xx x xxxx

DEMKO 01 ATEX 

128807X

Brüel & 

Kjær Vibro 

GmbH

ASA-06x

PTB 07 ATEX 2008

WARNING!
Explosive atmosphere!

Do not charge the battery of the VIBROPORT 80

E

 in potenti-

ally explosive atmospheres. The power supply module and 
docking station must not be operated in Ex zones.

This can cause explosions, resulting in damage to property 
and injuries.

•

Therefore only charge the battery outside potentially 
explosive atmospheres.

•

Never use the power supply module and docking station in 
potentially explosive atmospheres.

Summary of Contents for VIBROPORT 80




































































































































Reviews:

No comments