4
Front-end Configuration Step 1:
Connect the input module to the battery
The battery provides mobile power to the front end during
measurements and recording.
A) Place the battery next to the input module so that the type number
text on both modules are facing the same direction, and the battery
is to the left of the input module (as seen from the front.)
B) Remove the hex key from the input module.
C) Using the hex key, locate the four spring‐loaded screws around the
input module.
D) Using the screws, fasten the the input module to the battery and
place the hex key back into place.
A
B
C
D
