3
CONFIGURE THE HARDWARE
Wireless connection often means that you are performing a test while on the move. For this reason, the WLAN frame has been specially
constructed as a lightweight adaptor that conveniently connects your LAN‐XI module to a LAN‐XI Battery Module Type 2831‐A. With the
WLAN frame attached, you do not need to use cables to power your module.
What do you need?
•
LAN‐XI WLAN Frame Type 3660‐A‐200 or 3660‐A‐201
*
: referred to
as the “frame”
•
LAN‐XI Battery Module Type 2831‐A: referred to as the “battery”
•
A single LAN‐XI module: referred to as the “input module”
•
Hex key (included with every LAN‐XI module and frame)
•
An SD card if using LAN‐XI Notar BZ‐7848‐A
What do you do?
Front‐end configuration is a 2‐step process:
Step 1: Connect the input module to the battery
†
Step 2: Connect the frame
*
Type 3660‐A‐201 is available only in Japan.
†
If you have LAN‐XI Notar BZ‐7848‐A or Sonoscout BZ‐5950‐A, you may need
to insert the SD card before connecting the frame. Normally, this is done at
the factory.
