Brudden Movement Idea, User Manual

Page: 89 / 144

41
7
MAINTENANCE
STEEL CABLE
During the equipment use the cable may be damaged for misuse or lack of maintenance.
Sometimes the steel cable can be damaged even if it is not shown if it is damaged. Stay alert and
always observe any kind of problem as a cable. Do not use and do not allow the equipment to be
used if the steel cable is damaged. Below are some examples of damaged steel cable.
LOCKING STEEL CABLE
Always check that the screws are securely fastened to the plates. If the locks are damaged, do
not allow the equipment to be used. Contact Technical Assistance to make the change.
SNAP LINK
Some models use , so it is extremely important to check the condition of the carabiner. snap link
At the slightest sign of wear, deformation, difficulty to close and anything that could be
detrimental to its resistance, replace the
immediately snap link
REPLACEMENT CARABINER
For the replacement, always use a supplied directly by MOVEMENT. If it is not possible snap link
to obtain a supplied by MOVEMENT, use a that strictly meets the following snap link snap link
requirements.
-Material composition: Stainless steel AISI 316;
- Maximum closed capacity: 1600kg;
- Maximum open capacity: 350kg
ATTENTION!
-Monthly, verify with attention the conditions
snap link of the ;
- snap link Do not modify the in any way;
- snap link The opening of the must be
turned to the weights column.
TWISTED STEEL CABLE
Always check the steel cable if you find twists immediately replace the cable.
BULGES ON THE STEEL CABLE
If the cable ruptures internally, a bulge may emerge on the exterior part of the cable, replace the
cable immediately.