6
EPIC 2 MOTOR-manual-EN-1-01
November 2022
Preparation and Pre-flight Checks
On launch
1. Select a suitable take-off area determined by wind and terrain, clear of any obstacles that may catch in the
lines or damage the canopy.
2. Unroll the canopy with the bottom surface facing upwards, the openings at the downwind end of the take-off
area, and the harness at the trailing edge at the upwind side.
3. Unroll the canopy to each side so that the leading edge openings form a semicircular shape, with the trailing
edge drawn together at the centre of the arc. The harness should be drawn away from the canopy until the
suspension lines are just tight.
4.
Prepare and check your paramotor according to the manufacturer’s instructions.
5. Connect the wing to the paramotor (or to the tandem spreaders), making sure there are no twists in the
risers, and that the maillons or karabiners are correctly closed.
Pre-flight Checks
A thorough pre-flight procedure is mandatory on all aircraft. The following should be carried out before each flight.
1. Whilst opening out the paraglider check the outside of the canopy for any tears where it may have been
caught on a sharp object or even have been damaged whilst in its bag.
2. Check that the lines are not twisted or knotted. Divide the suspension lines into six groups, each group
coming from one riser. By starting from the harness and running towards the canopy remove any tangles or
Preparation and
pre-flight checks