19
EPIC 2 MOTOR-manual-EN-1-01
November 2022
Mounting Replacement Lines
If you need to replace lines on your glider, we recommended that a professional should mount the new lines. The
airworthiness of your glider, and your safety, depends on it being done correctly.
You can identify the line(s) you need to replace from the line layout diagram for your wing. Download the latest
version here: https://tinyurl.com/BGDlines
Replacement lines can be ordered from the Accessories section of www.flybgd.com.
1. Check that the lines you have received correspond with the latest update of the linesheet from the dropbox.
Also check the line layout on the glider corresponds with the line layout in the manual.
2.
The quickest way to remove the old lines is to cut them off. However, don’t cut the old lines off if you have
not received the new ones or you may end up not being able to fly! Sometimes only a part lineset is needed
(eg excluding top lines or brakes) so take care not to cut any lines that need to be retained.
3. Line junction: Microlines have an internal reinforcing in them, marked by yellow thread. This must be put on
the end where there is a line junction. Sheathed lines have no additional reinforcing.
Maintenance
External Reinforcing
Internal Reinforcing
No Reinforcing
white thread
white thread
yellow thread
