8
Now repeat the entire process for the left wing. When finished you will have 2
wing panels that look like this, ready for glue!
YOU WILL BE USING YOUR HOT
GLUE GUN FOR MOST OF THIS
BUILD. WHERE OTHER
ADHESIVES ARE UTILIZED IT
WILL BE NOTED.
Place the right wing panel on your
board and glue the spar in its
location as shown. You can draw a
pencil line between the tick marks
at the spars center if you wish.
Make sure it is correctly aligned on
the center and along the score line
closest to the leading edge fold.
Center
Aligned
Here
Align to Spar Score
Bead of Hot Glue
between Spar and
Top Skin
Correct Orentation
Press the glue down firmly:
KEEP YOUR GLUE GUN
LYING ON A SCRAP OF
CARDBOARD SO IT
DOESN’T DRIP HOT GLUE
ON THE BENCH
Gluing the Spar