22
Crease the score marks in the nose area
lightly with a popsicle stick. This allows the
nose sheet to bend to its contour.
FOLDING THE FUSELAGE
#1 Fold - Put glue in left channel here (⅓ full)
#1 Fold - Glue
bead on side of
Motor Mount
#2 Fold - Put glue in right channel here (⅓ full)
Fold #1:
Fold #2:
Glue and fold
the fuselage
sides in the
sequence
shown. Glue is
applied in the
channel and to
the side of the
motor mount for
each fold. Do not
glue the sides to
the temporary
former, just use
it as a guide to
set the angles.
Hold each side
firmly as the glue
sets.
*Note that right and left are always designated as if you were in
the cockpit with the with the aircraft right side up.
When the glue has cooled, run a
new bead in each corner and
wipe it to a radius with your
popsicle stick.
*
Beads of hot glue in
these locations
#2 Fold - Glue
bead on side of
Motor Mount
Note that the
sides go down
beside the top
in these folds.