11
Fold the top left wing
skin down as you did
for the right one,
pressing it all the
way down to check
the fit. Put glue in
the leading edge
bevel, on the top of
the spar, and along
the trailing edge and
fold it over again,
pressing the spar
and trailing edge
down firmly until the
glue cools.
*Top View
Folding the Left Wing
*
Beads of hot glue in
these 4 locations
Top Skin folds down
onto Bottom Skin
Put a bead of glue in the
top skin center joint. Glue
the #3 Posterboard Part
in place over the top
center joint with 3 beads
of glue as in the photo.
Once the glue has cooled,
squeeze a new bead in the
corner and wipe it with a
popsicle stick to form a nice fillet.
Put a bead of glue in the winglet channel.
Fold it up vertical and align it with the
winglet angle alignment tool from your kit.
See the diagram and photo.
Winglet Channel
Hot Glue Here