SET-UP
F19L216
NOTE:
It may be necessary to compress shock to
insert storage cover rod into storage cover, using
a 1/2 inch drive ratchet.
F19L0P6
2
1
3
Insert storage cover harness [1] in oval hole of
rubber grommet [2] (P/N 293 720 070), from
predelivery kit .
Secure rubber grommet on left side of storage
cover rod using locking tie [3], from predelivery kit .
Storage Cover Shock Installation
On GTX STD,LTD and Wake
smr2007-034-008_a
Snap the top of shock (body side) in inner shell
socket.
Place the bottom of shock [3] (rod side) against
the bump [2] on the shock support [1] and close
storage compartment cover. The bottom of the
shock will be inserted in its place automatically.
FINAL PREPARATION
Steering Alignment
Model(s):
D
All
F01K07A
1
Position handlebar in straight ahead position by
measuring each side the distance from handlebar
grip end to floorboard [1].
F01J5ZA
1
Check jet pump nozzle position by placing a
straight edge on nozzle outer end. Measure the
distance on each side of the straight edge [1]. It
must be equalled.
If necessary, steering alignment adjustment should
be performed at steering cable support.
Model(s): All Models except GTI Series
Open storage compartment cover and remove
basket.
Predelivery
2008-1
19 / 29
