SET-UP
2
1
2
F18K066
Secure steering assembly [1] with 4 M8 flat
washers [2] (P/N 234 081 600) and 4 M8 elastic
nuts (P/N 232 581 200) from predelivery kit .
Apply Loctite 243 (blue – threadlocker) on bolt
threads.
Torque to 12 N•m (9 lbf•ft).
1
F07K0H6
Install bearing support [1] (P/N 277 001 528) from
predelivery kit to cable support using 2 M6 x 50
(P/N 207 065 060) hexagonal bolts and 2 M6 flat
washers (P/N 234 061 600) from predelivery kit.
Do not torque yet.
D
Steering alignment procedure, described
further in this bulletin, must be performed prior to
torque bolts.
A
sbl2008-002-001_a
Secure vent tube [1] to steering support [2] and
steering cable [3] using 2 locking tie,[4] (not
provided )as show on the picture.
Model(s):
D
International only RXP-X model
sbl2008-002-550_a
NOTE:
Handlebar is now packaged into engine
compartment.
Unwrap handlebar
Predelivery
2008-1
13 / 29
