SET-UP
sbl2008-002-004_a
Unscrew the 8 M8 bolts and collapse “X” riser
block.
sbl2008-002-551_a
Install handlebar on “X” riser block with throttle
lever on right side.
NOTE:
Hole for DESS key must be toward rear of
watercraft. It also must be toward handlebar [1].
Install DESS key [2] on “X” riser block as shown.
Torque nut to 1.8 N•m (16 lbf•
in
).
sbl2008-002-552_a
Insert buzzer [1] through direction support / trim
and install on bracket at right of direction support
[2]. Apply Loctite 425 (P/N 293 800 040) on nut [3]
and torque nut to 3.3 N•m (29 lbf•
in
).
sbl2008-002-553_a
Insert wire harness [1] into direction support / trim
[3] and grommet [2], toward storage compartment.
Insert throttle cable [4] from storage compartment
into grommet and direction support / trim, toward
handlebar.
NOTE:
Throttle cable must pass over X riser.
sbl2008-002-554_a
Plug-in connectors into storage compartment.
14 / 29
2008-1
Predelivery
