BRP Johnson 4HP, Service Manual, Page: 73 / 185

5-7
MANUAL STARTER
NEUTRAL START INTERLOCK (NSI)
NEUTRAL START INTERLOCK (NSI)
ADJUSTMENT
1. Shift into “NEUTRAL” position.
2. Adjust and tighten the lock nuts
1
as shown position.
3. Loosen the adjustment nuts
2
.
4. Adjust the nuts
2
until the center of the reel stopper
3
aligns with the arrow mark
a
.
5. Tighten the nuts
2
.
6. Pull the recoil starter and make sure that the starter does
not work when the shift lever
4
is in “FORWARD” and
“REVERSE” position.
7. Apply Triple-Guard grease to the inner cable, the clutch
notch plate
5
and the reel stopper
3
.

Triple-Guard grease
If the NSI cable is removed or left without correct adjust-
ment, there is a high risk of losing one’s balance and/or
being thrown overboard if the motor starts in gear.
2 – 3 mm (0.08 – 0.11 in)
VIEW X