BRP Can-Am RYKER 2019 Series Operator'S Manual Download Page 81

Page: 81 / 179

SAFETY INFORMATION ON THE VEHICLE

Set Engine Stop Switch OFF

WARNING

– Always set the engine stop

switch to the OFF position be-
fore adjust footpegs and brake
pedal.

EN-704907708_DEC

219001998-204

1. Label located under the right side footpeg

Checking Engine Oil Level

ENGINE OIL AND COMPONENTS IN THE

ENGINE COMPARTMENT MAY BE HOT. DIRECT

CONTACT MAY RESULT IN SKIN BURNS.

Checking Engine Oil Level:

• The vehicle must be on a level surface.

• Make sure engine is at operating temperature.

• Let engine running at idle for at least 30 seconds.

• Stop engine & wipe the dipstick.

• Screwed dipstick in completely before checking oil level.

• Use XPS synthetic blend oil summer grade or equivalent motorcycle oil.

EN-704907060D_DEC

219001998-049

TYPICAL

1. Label located inside the right side service

cover

Coolant Hot - Do Not Open

rmo2008-003-003

COOLANT RESERVOIR CAP

219001998-051

______

SAFE OPERATING INSTRUCTIONS

______

Summary of Contents for Can-Am RYKER 2019 Series




















































































































































































Search results

Summary of Contents for Can-Am RYKER 2019 Series

Reviews:

BRP Can-Am RYKER 2019 Series, Operator'S Manual, Page: 81 / 179

Search results

Summary of Contents for Can-Am RYKER 2019 Series

Reviews: