BRP Can-Am RYKER 2019 Series Operator'S Manual Download Page 33

Page: 33 / 179

EQUIPMENT

90°

219001998-120

5. Hold the support and tighten the

screw.

TIGHTENING TORQUE

Mirror support

screw

5 N•m ± 0.5 N•m

(44 lbf•

± 4 lbf•

)

6. Adjust the mirrors.

Glove Box

This model comes equipped with a
glove box to carry small personal items
and store the operator's guide.
Press on the rear portion of the glove
box cover to open.

219001998-030

A double USB connector is also located
inside the glove box. Each USB plug
can charge with current up to 2.1A at
5V.

219001998-031

1. Double USB connector

Service Covers

Front Service Cover

219001998-032

The front service cover must be re-
moved to reach the following items:

– Battery
– Fuse box
– Coolant reservoir
– Diagnostic connector
– Engine oil filter.

Removing the Front Service Cover

1. On each side of the service cover,

insert a finger into the front lateral
opening and lift the retaining tab to
unlock the cover.

_______________

Summary of Contents for Can-Am RYKER 2019 Series




















































































































































































Search results

Summary of Contents for Can-Am RYKER 2019 Series

Reviews:

BRP Can-Am RYKER 2019 Series, Operator'S Manual, Page: 33 / 179

Search results

Summary of Contents for Can-Am RYKER 2019 Series

Reviews: