BRP 2013 Spyder RT, Operator'S Manual

Page: 123 / 191

MAINTENANCE SCHEDULE
MINIMUM MAINTENANCE -
IF DRIVING LESS THAN 7 500 KM (4,600 MI) ANNUALLY
Replace engine oil and oil filter.
Replace the Hydraulic Control Module (HCM) oil filter (SE5 model only) .
Check clutch fluid level (SM5 model only) (1) .
Check radiator, hoses and water pump.
Check engine coolant level (1) .
Perform a pressure test of cooling system.
Check reverse mechanism operation. Adjust as required (SM5 model only) .
Using BRP Utility and Diagnostic Software (B.U.D.S.), check fault codes and install
required updates.
Clean the rear wheel speed sensor. Check the sensor gap. Adjust as required (2) .
Using BRP Utility and Diagnostic Software (B.U.D.S.), check pillion rider switch
operation.
Inspect throttle twist grip operation.
Replace the fuel filter (every 5 years).
Check battery connection tightening. Clean them if necessary.
Check lighting system (brake light, hazard warning light, turn signal lights, position
lights, license plate light).
Check operation of control switches.
Inspect the drive belt condition and its tension. Adjust if required.
Check bearing condition of rear sprocket and rear wheel.
Check front wheel bearings condition.
Check tightening torque of front wheel lug nuts.
Check tightening torque of the rear wheel axle nut.
Check steering for abnormal play.
Check tie-rods condition.
Check shock absorbers for leak or other damages.
Lubricate front suspension arms.
______________
121