Browning BTC-6FHD, Instruction Manual

Page: 15 / 28

Image Data Strip
Your trail camera has an information bar that is printed at the
bottom of each photo taken. This info strip shows the
following information: time, date , moonphase, temperature,
barometric pressure and camera ID. This option can be turned
on or off, using the ENTER button to unlock, UP and DOWN to
change, ENTER to lock new selection.
Press the DOWN BUTTON to continue to the Motion Test feature.
1 1
Motion Test
Your trail camera is equipped with a MOTION TEST feature.
This feature helps you aim the camera at your target area.
With the motion test turned on, simply walk around in your
target area. When your presence is detected, a red LED on
the front of the camera will flash.
Simply press the ENTER button, the selection will flash.
Use the UP and DOWN arrows to change the option.
Press the ENTER button to confirm selection.
Make sure you turn OFF the MOTION TEST function
before leaving the camera in the field. Press the MODE
button while in test mode to exit test mode.
Press the DOWN arrow to proceed to the next setting.