BROWN 2000 Series, Owner'S/Operator'S Manual

Page: 30 / 60

30
THE TEN COMMANDMENTS OF OPERATION
1. AlWAyS - Read and understanding the owners manual before operating this
or any other equipment.
2. AlWAyS – Attach this equipment to a tractor that has suitable safety
equipment properly installed.
3. AlWAyS – Operate this equipment with all safety devices properly installed
on this equipment.
4. ALWAYS – Inspect, walk, flag or remove all foreign material from job site
before starting the cutting process.
5. NEvER – Allow any riders or bystanders within 300 feet of this unit during
operation.
6. ALWAYS – Check all bolts, fasteners, fittings and oil levels before beginning
operations each day.
7. NEvER – Allow blades to make contact with rocks or stumps – unit was not
designed for this type of operation.
8. NEvER – Allow an untrained operator to operate this equipment.
9. AlWAyS – Install only genuine Brown replacement parts.
10. AlWAyS – Remain on tractor seat until blades have stopped turning and all
tractor shut down procedures have been completed.
THESE ARE ONly A FEW OF THE SAFETy pROCEDURES THAT MUST BE
FOllOWED TO INSURE THE SAFE OpERATION OF THIS EqUIpMENT – MANy
OTHER SAFETy RElATED pOINTS ARE STATED THROUgHOUT THIS MANUAl
WARNINg:
FAIlURE TO FOllOW THE TEN COMMANDMENTS
CAN AND WIll CAUSE SERIOUS INJURy OR DEATH
IF yOU HAvE ANy SAFETy, MAINTENANCE OR OpERATIONAl qUESTIONS –
plEASE CAll THE FACTORy BEFORE USINg THIS EqUIpMENT – 1-800-633-8909