Brown Products Limb Tremor MPT30-10, Manual

Page: 22 / 40

PAGE 21
P
EQUIPMENT SAFETY
P
The Ten Commandments of Opera on
1. ALWAYS - Read and understand the owners manual before opera ng this or
any other equipment.
2. ALWAYS - A ach this equipment to a tractor that has suitable safety equipment
properly installed.
3. ALWAYS - Operate this equipment with all safety devices properly installed and
func onal. NEVER DISABLE OR REMOVE THE SLIDING BLADE GUARD.
4. ALWAYS - Inspect, walk, and flag or remove all foreign material from the job site
before star ng the cu ng process.
5. NEVER - Allow any riders or bystanders within 100 feet of this unit during
opera on.
6. ALWAYS - Check all bolts, fasteners, fi ngs and oil levels before beginning
opera ons each day.
7. NEVER - Allow blade to make contact with rocks or stumps - unit was not
designed for this type of opera on.
8. NEVER - Allow an untrained operator to operate this equipment.
9. ALWAYS - Install only genuine Brown replacement parts.
10. ALWAYS - Remain on tractor seat un l blade has stopped turning and all tractor
shut down procedures have been completed.
THESE ARE ONLY A FEW OF THE SAFETY PROCEDURES THAT MUST BE
FOLLOWED TO INSURE THE SAFE OPERATION OF THIS EQUIPMENT - MANY
OTHER SAFETY RELATED POINTS ARE STATED THROUGHOUT THIS MANUAL
WARNING:
FAILURE TO FOLLOW THE TEN COMMANDMENTS OF
OPERATION CAN CAUSE SERIOUS INJURY OR DEATH
IF YOU HAVE ANY SAFETY, MAINTENANCE OR OPERATIONAL QUESTIONS
PLEASE CALL THE FACTORY BEFORE USING THIS EQUIPMENT AT 1-800-897-3726