Brown Products Limb Tremor MPT30-10, Manual

Page: 24 / 40

PAGE 2 3
g
Assembly
1. Install the gauge wheel [A] in the storage bracket or in the wheel mount bracket [D]
and secure with provided hitch pin.
2. A ach limb guard [B] (op onal) to moun ng holes on side of deck assembly with
provided bolts and nuts. Gauge wheel mount bracket [D] must be removed and
reinstalled, placing the limb guard mount between the deck and wheel mount
bracket.
3. Place offset retaining bar [C] in storage bracket on quick hitch assembly.
4. install the op onal If purchased, gauge wheel and wheel mount [E] (#210-042)
to moun ng holes on le side of deck with provided bolts and nuts. If equipped with
limb guard [B], wheel mount
a aches on the outside of limb guard mount.
5. Install hose mount assembly [F] to the moun ng bracket on the quick hitch assembly.
6. Insert hydraulic lines in the hose mount assembly [F] and a ach hoses to cu er
motor. (Hose Kit is available as an op on, part #210-768.)