Browlee-Morrow Vulcan Pumps HDS 100L, Installation, Operation And Maintenance Manual

Page: 7 / 51

Document No. – A1540 Date – 23 January 2014 Revision – 0
Uncontrolled Copy
4
1.0 General
1.1 Introduction
The Vulcan HDS submersible pump has been designed and manufactured to handle the
toughest pumping applications and environments. It is our desire to provide our customers with
high quality products and service that exceeds their application expectations.
This manual is intended to assist technical personnel with the installation, operation and
maintenance of the HDS submersible pump. It is our recommendation that this manual be
thoroughly reviewed and understood prior to performing any installation, operation or
maintenance related activities. Please contact your local Vulcan representative if you have any
questions related to the instructions and procedures within this manual.
1.2 Transportation & Storage
WARNING!
1.2.1 Transportation
The pump is required to be transported in a vertical position in the normal operating orientation.
The standard shipping packaging is comprised of the pump support stand secured to an open
pallet with the pump and motor and motor cables wrapped in shrink wrap. Optional crating is
available; please contact your local Vulcan representative for crate details and pricing.
1.2.2 Storage
1.2.2.1 Short Term Storage
New pumps being stored less than three months time before installation require storage in a dry
environment at temperatures ranging from 10°C (50°F) to 49°C (120°F), relative humidity must
not exceed 60%. The shaft must be rotated 15 times every 30 days.
BEFORE LOADING AND UNLOADING EQUIPMENT PLEASE REFER TO
SECTION 3.2 HANDLING & LIFTING!