10
Thermometer
1 pc.
M5x9 bolts
15 pieces
M5 nuts
15 pieces
Manual
1 pc.
Technical data:
Power: 1100 W
Voltage: 220V-240V
Frequency: 50 Hz
Power supply cable 170 cm
Thermometer in the cover, with temperature range of 0-250
o
C
Temperature control unit
Material: stainless steel
Body diameter: 25 cm
Body length: 45 cm
Total length with handle: 65 cm
Weight: 5.2 kg
Height between the grill and the upper wall: 13.5 cm
2. Assembly
Assemble the device on a clean and flat surface.
Tools needed: cross head screwdriver and wrench No. 8.
1. Screw the feet to the smoker body using 8 bolts (used two bolts for each foot). Put the
bolt into the right hole from the outside and twist a nut onto the thread from the inside.
2. Slide the heater into the smoker chamber and screw it to the body in the side part
between the feet using two bolts and two nuts. Next, installed the shield on the heater and
screw it to the bottom edge of the body using a bolt and a nut.
3. Screw the wooden holders in place (one in the upper part of the body, the other to the
smoker cover) using bolts. Insert them from the outside of the body and the cover and
twist a nut onto each of them from the inside of the chamber and the cover.
4. Install the thermometer in the upper part of the body, in a dedicated opening, by screwing
it in place from the inside of the chamber.
