7
Remove the probe from the meat.
8.
MANUALLY SETTING TARGET TEMPERATURE
Press and hold MODE button for 3 seconds, TARGET TEMP will start to flash.
Press MIN or SEC buttons to select the desired temperature.
Press MODE button to confirm setting.
9.
TIMER
To start the count up timer press the S/S button.
To start the countdown timer, press MIN button to set the minutes and to set seconds, press SEC.
Once the countdown has finished, the monitor will beep and the M:S will flash on the screen.
To start and stop the timer, press S/S.
To reset the timer, press CLEAR.
10.
SWITCHING OFF THE THERMOMETER
Set the POWER switch to OFF mode at the back of thermometer to switch off the base thermometer.
Set the POWER switch to OFF mode on thermometer stand to switch off the sensor.
Note:
Always drive the thermometer in the thickest part of the meat.
Avoid driving the thermometer in fatty parts of the meat.
Do not drive the thermometer into meat with bones.
Thoroughly clean the parts of the thermometer made of stainless steel after each use (with hot water and
soap).
After using do not leave the probe hanging from the grill or in the oven.
Do not put the probe directly into water or water stream.
11.
PRECAUTIONS:
Do not expose the device to strong vibrations and mechanical strain.
Avoid sudden and dramatic temperature changes (direct sunlight, low negative temperatures).
Clean the casing and the display with a soft and slightly wetted cloth.
Do not immerse the device in water.
Immediately remove used batteries from the device. Use only the type of batteries specified below.
Caution:
-
Do not put the probe into temperatures exceeding 300°C
- Do not leave the probe on the grill or inside the oven after use.
- Do not insert the thermometer or probe directly into the water or under a stream of water.
- Wipe the thermometer probe with a damp cloth after each use, probe wire clean by dry cloth
Caution!
Every household uses electrical and electronic appliances, and thus is a potential source of waste, hazardous to humans
and the environment, due to the presence of hazardous substances, mixtures, and components in the equipment. On
the other hand, discarded equipment is a valuable resource from which raw materials like copper, tin, glass, iron, and
others can be recovered.
The symbol of the crossed out wheelie bin placed on the equipment, packaging, or documentation attached to
it, means that the product must not be disposed of together with other waste. The labelling simultaneously
means that the equipment was introduced to the market after the date of August 13th, 2005.
It is the responsibility of the user to transfer the used equipment to a designated collection point for proper
recycling. Information on the available collection system for electrical equipment can be found in the shop’s information
and at the municipal office. Proper handling of discarded equipment prevents negative consequences for the
environment and human health!
Simplified Declaration of Conformity
Producer BROWIN Sp. z o. o. Sp. k. ul. Pryncypalna 129/141, PL 93-373 Łódź represents that the appliance of BROWIN
brand, 186009 model, is compatibles with the Directive 2014/53/EU of the European Parliament and the Council of 16
April 2014 on the harmonisation of the laws of the Member States relating to making available on the market of radio
equipment and repealing the Directive 1999/5/EEC. Full Declaration of Conformity is available at the website
