BROWER TIMING SYSTEM TCi-System User Manual Download Page 7

Page: 7 / 13

www.browertiming.com

Chronograph Mode

Chron

mode has a resolution of a

1/Hundredth of a second. This is the stan-

dard mode used for the majority of timing

applications.

TCi-Timer Modes

For both

TCi-Timer

and

TCi-Timer SMARTPHONE

Use the

Mode

button to scroll through the mode options. When on the

desired mode press

Enter

. The

TCi-Timer

is now setup to time the event.

1/Thousandth Mode

KPH/MPH Mode

1/Thousandth

mode is similar to the

Chron

mode but displays 1/1000th of a

second resolution. In this mode the dis-

play will only time to 9.999 seconds.

This mode is useful in timing short spans

between the start and finish where extra

resolution is needed for differentiation.

All of the functions work the same as the

“Chron” mode.

Rule:

You must have at least 0.12

seconds of time between start

PhotoGate

and finish

PhotoGate

KPH/MPH

mode calculates kilometers

per hour and miles per hour.

Rule:

You must have at least 0.2 seconds

of time. And .5 seconds for high accuracy

At 20 mph the span needs to be 4 feet or

more. At 100 mph it is 18 feet or more.

Use

Up Split/Scroll Arrow

alternate between KPH and MPH.

Scroll to set the number of

feet

meters

between the two

Photo-

Gates

When passing through the start and finish gates,

MPH will be seen on the top display and elapsed

time on the bottom display. When adding a split,

the

TCi-Timer

will show MPH on the top display

and advancing

CUM

times on the bottom display.

Standard

Memory Review

functions will apply.

BLE ON/Off

If the

TCi-Timer

was purchased with the

Smartphone Interface

the

BLE

mode will allow “On” or “Off”.

Select “On” to allow the

TCi-

Timer

to connect with a Smart-

phone using the

Brower Timing

Test Center App

. Select “Off” to

block Smartphone from connecting to the

Timer. If the

TCi-Timer

does not have the

Smartphone Interface

installed the mode

will display “no BLE.” Contact Brower

Timing for information on upgrading to

the

Smartphone Interface

Enter

Split/Scroll

Summary of Contents for TCi-System














Search results

Summary of Contents for TCi-System

Reviews:

Related manuals for TCi-System

Brands by name

Popular brands

BROWER TIMING SYSTEM TCi-System, User Manual

Search results

Summary of Contents for TCi-System

Reviews:

Related manuals for TCi-System

Brands by name

Popular brands