User’s Guide
Version 1.0
Port forwarding is limited to
255
rules.
Network Interface | Configuration | DHCP Relay
If BW1330 use DHCP relay on its LAN interface, administrator can designate the DHCP relay server.
Figure 88 – DHCP Relay Server
The default value is “255.255.255.255”, it means BW1330 will broadcast client’s DHCP request to its
WAN interface. Administrator can designate an only server’s IP address.
Network Interface | Configuration | User ACL
User ACL provide high flexibility for administrator to define the rules for BW1330 to filter the packets
which will forward or masquerade by it.
Figure 89 – User ACL
To add a new rule, just click the “new” button
Figure 90 – Create a new rule (first step)
First step select the rule policy (drop/accept/masquerade) to deal with packet and the packet type
(all/TCP/UDP/ICMP).Then decide the incoming and outgoing interfaces(any/br1/ixp1).
Figure 91 – Create a new rule (second step)
Second step select the type of source IP and destination IP (special IP/any IP).
Figure 92 – Create a new rule (third step)
Third step choose the type of source port and destination port (any port/special port).
Figure 93 – Create a new rule (fourth step)
Fourth step, fill out the source IP address and destination IP address (including IP address and net
mask, if you choose “any IP” in second step, you do not need fill out the IP address); fill out the
source port and destination port (if you select any port in third step or select protocol ICMP/all, you do
not need fill out the port).
BROWAN Page
65
Summary of Contents for BW1330
Page 2: ......
