User’s Guide
Version 1.0
Initialization
This paragraph describes how to access the Web configuration interface of the BW1330. After
unpacking and connecting the product for the first time it responds to a dynamic IP address given by
the DHCP server on LAN or WLAN interface.
The default network settings for your new access controller are:
Ixp1(WAN) port:
IP 192.168.2.66
subnet 255.255.255.0
Br1
IP 192.168.3.1
subnet 255.255.255.0
Ixp0 (LAN) port:
In Bridge
WLAN1_0(first virtual AP):
In Bridge
For other management methods: SNMP and command line interface (CLI) please
refer to their respective chapters.
Access Your BW1330
After connecting the BW1330 device to network, try to access the BW1330 via one of the method:
Follow these instructions to access your BW1330 using the Web browser:
Step 1
●
Access your device via LAN connected by RJ-45 cat.5 cable or wirelessly connect to
BW1330 by default SSID “BW1330” without any encryption. Waitting for DHCP server to
give an IP address 192.168.3.x to your client PC. Open the Web browser and type the IP
address of the BW1330:
https://192.168.3.1/a.rg
●
Configure your PC with a static IP address on the 192.168.2.x subnet with mask
255.255.255.0. Connect the BW1330 WAN interface into the same physical network as
your PC. Open the web browser and type the default IP address of the BW1330:
https://192.168.2.66/a.rg
Step 2
Enter the BW1330 administrator login details to access the Web management.
The default administrator log on settings for all access point interfaces are:
User Name:
admin
Password:
admin01
figure 8 login page
Step 3
After successful administrator log on you will see the main page of the access
controller’s
Web
interface
:
BROWAN Page
16
Summary of Contents for BW1330
Page 2: ......
