User’s Guide
Version 1.0
figure 76 – remove interface
Click apply changes button and then reboot system to finish the removing.
figure 77- apply and reboot
Network Interface | Configuration | VLAN
Up to
4094
VLANs can be created in the system.
Virtual Local Area Networks (
VLANs
) are logical groupings of network resources. You can create your
own VLANs on your AC using the network
interface | configuration | VLAN
menu. By default no
VLANS are defined on the system:
Figure 78 – VLAN
To create a VLAN on the AC click the new button and enter following parameters:
Figure 79 – Create New VLAN
Interface
– select interface for your VLAN network. VLANs cannot be created on a bridge.
Status
– non-editable, by default is disabled.
ID
– assign ID for your VLAN network [1 to 4094]. Client devices that associate using the ID are
grouped into this VLAN.
You can not create VLANs which interface includes in bridge such as ixp0.If you
want to create VLANs on the interface ixp0 you must separate ixp0 from bridge(br1
interface) via
network interface| configuration| Bridge
menu. Refer to
Chapter 8
Network Interface | Configuration | Bridge
Please note after remove ixp0(LAN) it is DHCP server disabled as default.You will
connect BW1330 either via WAN port(fix IP:192.168.2.66) or wlan1_0 wireless
connected which DHCP server enabled(ip:192.168.3.x) as default.
Other VLAN settings cannot be changed. Click on the
disabled
link to continue specifying settings for
your VLAN. The network interface configuration page is opened and VLAN settings are ready for
editing:
BROWAN Page
62
Summary of Contents for BW1330
Page 2: ......
