Browan BW1251 User Manual Download Page 34

Page: 34 / 75

BW1251

Nov 15, 2006

Browan

Page 33 of 72

Figure 30 – DHCP Relay settings

Server IP

– the IP address of the external DHCP server.

Only one DHCP server can be supported for DHCP relay feature.

Change status or leave the default state if no editing is necessary and click the

Save

button.

Figure 31 –Apply or Discard DHCP relay Settings

Every time settings are changed, the BW1251 needs to be restarted to apply all settings changes
when clicking

Apply

Changes

. Request for server reboot appears:

Figure 32 – Reboot information

Reboot

– restarting the server and applying the changes.

If there is no other setting needed to be modified, click the

Reboot

button to apply

all modifications.
And if there are still other setting modifications needed, go ahead to finish all
changes and then click

Reboot

button to restart and apply all settings together.

Summary of Contents for BW1251











































































Search results

Summary of Contents for BW1251

Reviews:

Related manuals for BW1251

Brands by name

Popular brands

Browan BW1251, User Manual

Search results

Summary of Contents for BW1251

Reviews:

Related manuals for BW1251

Brands by name

Popular brands