BW1251
Nov 15, 2006
Browan
Page 15 of 72
The default network settings for your new access point are:
LAN port:
IP 192.168.2.2
subnet 255.255.255.0
Software Introduction: KickStart
The BROWAN
KickStart
is a software utility included on the Installation CD.
The utility automatically detects access points or access controllers installed on your network
regardless of its host IP address and lets you configure each unit’s IP settings. The feature list for the
KickStart
utility is listed below:
Scanning your subnet for all connected APs, ACs
Quick access to your AP via HTTPS, telnet, SSH
To install the
KickStart
utility, insert the Installation CD into your CD-ROM drive. Find and install the
utility from the product CD into the computer.
Access Your BW1251
There are two ways to connect to your BW1251’s web service:
Use
the
Web
browser
.
Launch
the
KickStart
utility on your product CD.
If first method is preferred, please follow these instructions:
Step 1
Configure local PC with a static IP address at the range of 192.168.2.1~254 with
subnet mask 255.255.255.0. Connect the BW1251 to local PC on the same physical
network. Open web browser of the local PC and enter the default IP address of the
BW1251 on the address bar: https://192.168.2.2
Step 2
Enter the BW1251 administrator login credential to access the Web management page.
The default administrator log on settings for all access point interfaces are:
User Name:
admin
Password:
admin01
If the Installation CD does not start automatically, please run “
autorun.exe
”
manually from the root directory of the installation CD.
