Vinoferm
®
Fruit Press wooden basket 12 l + 18 l
015.080.12 + 015.080.18
Instruction manual
Distributed by Brouwland
Korspelsesteenweg 86
3581 Beverlo, Belgium
www.brouwland.com
4. The base of the press should be screwed to the floor or to a firm, solid base,
using the holes in the feet (screws not included).
5. Put the empty juice bag (9) in the press with the threaded rod (8) through
the hole in the juice bag. Stretch the juice bag over the bucket. Then fill it
with the chopped fruit and, if necessary press down the fruit by hand. When
the juice bag is filled, fold it inwards.
6. Place the 2 wooden semi-discs (7) on top of the fruit, followed by the
wooden blocks (6). Subsequently place the pressing plate assembly (4 &
5) on top of them, so it is crossing lengthwise over the wooden plates.
7. Place the nylon washer (3) on top of the pressure plate assembly as shown
in the illustration. Screw on the trunnion (2), push the handle into the
trunnion and rotate the handle (1) down to press the fruit down into the
barrel.
8. Never use an extension bar on the handle. The second pair of blocks
provided may be inserted when space allows for it, to force the wooden
plates as near as possible to the base of the press. If the handle reaches
the wooden barrel assembly and pressure still needs to be increased,
release the trunnion and place one set of wooden blocks between the
wooden plates and the pressing plates. Place a container beneath the
outlet spout in the base (13) to collect the juice.
DISASSEMBLY:
•
Disassemble unit by removing handle from the trunnion.
•
Unscrew the trunnion from the threaded bar.
•
Remove all wooden blocks and pressing plates.
•
Barrel can now be lifted from the base.
•
Unscrew the feet of the base.
Put chopped fruits inside the bucket
Attention:
smooth edge must
contact the base
