Vinoferm
®
Fruit Press wooden basket 12 l + 18 l
015.080.12 + 015.080.18
Instruction manual
Distributed by Brouwland
Korspelsesteenweg 86
3581 Beverlo, Belgium
www.brouwland.com
EN
Vinoferm
®
Fruit Press wooden basket 12 l + 18 l
015.080.12 + 015.080.18
Thank you for purchasing the Vinoferm
®
Fruit press.
PARTS LIST:
Remark:
Additional parts that may be needed but are not included: screws to mount feet
of base to solid base.
USAGE:
•
The Vinoferm
®
Fruit Press needs to be assembled. You can find the assembly
instructions further on.
•
Clean the Vinoferm
®
Fruit Press before and after each use with Chemipro
®
Wash and Chemipro
®
San. Then dry thoroughly.
•
If left unused for prolonged periods, coat all metal components with a thin
film of Vaseline or food-safe oil and store in a clean, dry environment. Check
the press’s condition before using again and if mold is apparent, wash
thoroughly, rinse, dry and apply a film of fresh food-safe oil to its metal
components.
•
Before use, all components must be scrupulously clean and all traces of old
oil removed to avoid the possibility of contamination of the produce.
•
To maximise the yield from your fruit, it is best to grind or crush the fruit prior
to pressing. You can run the fruit through your fruit crusher, shredder or food
mill to reduce the size.
•
Ensure that the legs of the Vinoferm
®
Fruit Press are attached and screwed
to a flat surface prior to pressing. This will prevent the unit from sliding or
tipping over during operation.
•
Keep hands clear while the press is turning.
•
Do not alter the handle by making it longer.
•
There is a 2-year warranty on this Vinoferm
®
Fruit press.
ASSEMBLY AND OPERATION:
1. Wooden barrel assembly--- Assemble metal ring (10) and cage slat (12),
make sure all cage slats (12) with bevel edge are in one direction, the
opposite end with smooth edge in line in the opposite side.
2. Wooden pressing plate (5) and metal pressing plate (4) assembly with
screws (11).
3. Threaded rod assembly (8), then mount to the base (13). NOTE: The
threaded rod with the 2 small pieces, should be assembled first.
Part No. Description
QTY
1
Handle
1
2
Trunnion
1
3
Nylon washer
1
4
Metal pressing plate
1
5
Wooden pressing plate
1
6
Wooden blocks
4
7
Wooden plate
2
8
Threaded rod
1
9
Juice bag
1
10
Metal ring
2
11
Screw
See remark
12
Cage slat
See remark
13
Base
1
Model
Part 11
Part 12
12 l
53 pcs
25 pcs
18 l
53 pcs
25 pcs
bevel edge
smooth edge
