7
Brewing kettle BREWFERM
®
pro
Operating buttons
The time symbol (min) blinks and the time that was last
set is indicated and can be changed by the ‚Min’ or ‚Plus’
button.
If after starting the time setting mode or after changing
the time by pressing the ‚Min’ or ‚Plus’ button no entry is
made for 5 seconds, the time setting mode switches off
and the appliance returns to the operating mode. Upon
reaching the set temperature (nominal temperature), the
time that was last set is counted down.
Raises the temperature; when pressing the button shortly
the temperature counts up number by number until 100°C
are reached (highest possible temperature setting).
If you keep the button pressed, count up is faster.
If after starting the temperature setting mode and chang-
ing the temperature by use of the ‚Min’ or ‚Plus’ button
no entry is made for 5 seconds, the temperature setting
mode switches off and the appliance returns to the oper-
ating mode.
Lengthens the time span; when pressing the button short
-
ly the time counts up number by number; (120 minutes /
▬
continuous operation = maximum setting). If you keep
the button pressed, count up is faster.
To change again to the continuous operation mode,
the time must be set to
▬
continuous operation in time
setting mode. Even during countdown of the time it is
possible to change temperature and time.
Shortens the time span; when pressing the button shortly,
a number by number countdown is effected; (1 minute =
lowest possible setting). If you keep the button pressed,
countdown is faster.
If the appliance was set to continuous operation mode
before choosing the time setting mode (time indicated:
▬
min), the display changes from
▬
continuous operation
mode to 120 min and then countdown to 0 min is started.
The appliance can be switched off at any time. Time
settings made in the time setting mode will not be saved.
The last temperature setting is saved and is displayed
again after restarting the boiler, even if the appliance had
been disconnected from the mains in the meantime.
It is necessary to pull the plug from the socket after
switching off the appliance.
Time mode
Switch off the appliance
Press button
“temperature/time” 2x
“plus” button
“plus” button
“min” button
Press button “On/Off” 1x
°C/min
Θ
Θ
