6
Brewing kettle BREWFERM
®
pro
Operating buttons
After switching the appliance on by pressing the On/Off-
button all LCD-segments (liquid crystal display) are lit for
a second.
The temperature that was last set is indicated.
The ciphers of the temperature display blink when the
temperature measured by the boiler differs from the set
temperature (nominal temperature). Once the set tem-
perature is reached, the ciphers are constantly lit.
Time:
▬
= continuous operation mode
Appliance heats up until set temperature is reached and
runs in continuous mode until ‚On/Off’ button is pressed
again.
The temperature symbol (°C) blinks, ciphers are perma-
nently lit when the set temperature has not been reached.
Time:
▬
in continuous operation mode; The heating goes
on working during setting mode to heat up until set tem-
perature is reached or set temperature is maintained.
Lowers the temperature; when pressing the button
shortly, a number by number countdown is effected until
30°C are reached (lowest possible temperature setting).
If you keep the button pressed, countdown is faster.
Insert plug
Display is lit
Temperature mode
Switch on the appliance
Temperature display 30 - 100°C
Time display 1 - 120 minutes
▬ =
continuous operation
Option switch
temperature / time
Min
On / Off
Plus
Press button “On/Off” 1x
Press button
“temperature/time” 1x
“min” button
°C/min
Θ
Θ
