Brouwer 5990280/1, Operator'S Manual

Page: 42 / 80

OPERATION
TUBE LIFT- RACK CONTROL SWITCH.
The Tube Lift-Rack Control Switch ‘ A ’.
•
To raise the Tube Rack, press the top of the
switch - ‘
UP ’.
•
To lower the Tube Rack, press the bottom of
the switch - ‘
LOWER ’.
WARNING
Before removing tubes from the Tube Rack, to load
the Tube Dispenser, or when loading the Tube Rack:
•
The operator must stop the harvester and
switch the tractor engine ‘
OFF ’.
•
Failure to observe this precaution could result
in serious injury.
TUBE LIFT RACK.
Loading the Tube Lift Rack.
•
Open the Access Door ‘ B ’, to Load the Tubes,
IMPORTANT
Do not overload and jam the tubes against the Lift
Rack top lifting brackets.
TUBE DISPENSER.
The Tube Dispenser Lever.
•
To dispense a Tube into the Roll-Up Conveyor
pull the Dispenser Lever ‘
C ’, ‘ FORWARD ’,
only when Roll-Up Conveyor is correctly
positioned on the return swing.
•
The Tube Dispenser can hold five tubes. It is
loaded manually From the Tube Rack.
3-08