Brouwer 5990280/1, Operator'S Manual

Page: 25 / 80

ASSEMBLY TO TRACTOR
SET-UP INSRTRUCTIONS cont..
Install the Caster Wheel onto the F-Frame :
•
Fit three Spacer Washers ‘ A ’, onto the Caster
Wheel Spindle.
•
Fit the Caster Wheel Spindle into the Spindle
Housing ‘
B ’.
•
Fit the Top Spacer and Hitch Pin ‘ C ’.
IMPORTANT
When the RollMax Unit has been installed onto the
F-Frame, check that the Caster Wheel is ‘lightly’
touching the ground. Adjust the quantity of Spacer
Washers ‘
A ’, to attain the correct contact.
Fit the F-Frame to the Main Frame :
•
Locate the F-Frame in the Main Frame Mount
Brackets ‘
D ’.
•
Insert the Pins ‘ E ’, fit Shim Washers to take-up
excess side play.
•
Fit the Retainer Bolts.
Installing the RollMax Unit :
•
Use a Crane or Forklift to lift the RollMax Unit off
the Shipping Supports ‘
F ’.
WARNING
Exercise care when lifting the RollMax Unit. Attach the
lift straps as shown to prevent the unit from tipping.
Place a C-Clamp at the fork end, to prevent the lift strap
from slipping off the fork.
•
Carefully maneuver the RollMax Unit to fit the
Mounting Brackets ‘
G ’, into the F-Frame Brackets.
•
Install the Pivot Pins ‘ H’ , and Retainer Bolts.
2-03