Brouwer Kesmac 4500, Operator'S Manual, Page: 43 / 51

SCHEDULED MAINTENANCE
After first 10 hours. ( or daily ).
Check :
•
Engine Air Filter Indicator.
•
Engine coolant level.
•
Hydraulic oil level.
•
Fuel level.
After 50 hours ( 3 months ).
Check :
•
The Air filter indicators.
Do not remove the
filter until necessary.
See page 28.
•
All fasteners for tightness.
•
The hydraulic system filter indicator.
•
The wheel lug nuts. Torque to 100 lb/ft.
( 135 Nm.)
•
Grease all lubrication points. See page 45.
•
Hydraulic oil level with all cylinders retracted,
and on retractable models the legs extended.
Top as required,
but do not over-fill.
•
Lift chains tightness : Raise the forks, the front
chain should be ‘hard tight’, the rear chain ‘snug
tight’.
•
Battery electrolyte level. Clean the terminals.
40
After 250 hours.
IMPORTANT
If the machine is operated in dry, dusty conditions or an
environment that may warrant it, carry out this service
before the recommended schedule time.
Check :
•
Air filter indicator.
Do not remove the filter
until necessary.
See page 28.
•
All fasteners for tightness.
•
Hydraulic system filter indicator, and oil level.
•
Wheel lug nuts. Torque to 100 lb/ft. (135 Nm).
•
Lift chains ‘tightness’.( See 50 hour check).
•
Transport and working lights.
•
Transport mounting points. Safety chains and
Hook-up Cable.
•
Adjust the engine ‘idle’ speed : Standard Engine
1000 rpm. Turbo Engine 1200 RPM. Refer to the
Kubota Engine manual.
•
Hydraulic cylinders, hoses, tubes and fittings for
leaks.
NOTE
All of the above checks to be carried out every 250
hours, unless otherwise specified.