Brouwer Kesmac 4500, Operator'S Manual, Page: 20 / 51

INSTRUMENT PANEL
Fig.8
LIGHTS SWITCH
The Lights Switch operates the Spot and Flood Lights that
are mounted on the F.O.P.S. Frame and the Reverse Flood
Light located in the rear panel.
ENGINE COOLANT. Temperature.
Normal operating temperature is 185 deg. F. (85 deg. C).
If the temperature exceeds this, allow the engine to ’idle’
for a short time. If the temperature remains high, switch the
engine ‘OFF’ immediately.
Check for any obvious signs of leaks.
Let the engine cool down before removing the radiator cap
in order to check the coolant level.
Rectify any leaks and top up the coolant before operating
the machine.
HYDRAULIC OIL. Temperature.
Normal operating temperature is 160 deg. F. (71 deg. C).
If the temperature approaches 200 deg. C. (93 deg. C.),
Let the engine ‘idle’ for a short time. If the temperature
remains high, shut down the machine immediately.
Check for hydraulic oil leaks.
Allow the system to cool down before checking the oil
level or attempting to rectify any leaks.
Fig.8
1. Hour Meter 7. Horn
2. Engine Temp. 8.Diff-Lock
3. Hydraulic Oil Temp’. 9. Parking Brake
4. Lights Switch 10. Alternator Lamp
5. Pre-Heat Lamp 11. Engine Oil Press’.
6. Retract/Extend Legs
17