Brouwer Kesmac 4500, Operator'S Manual, Page: 32 / 51

FILTER REPLACEMENT
NOTE
There are two elements fitted in the air cleaners used
on the standard engine and the Turbo Model.
The inner, or safety element, under normal operating
conditions should not require replacement.
Fig.18
To replace the Primary Air Filter :
•
Release the retainer latches ‘
A
’ on the End
Cover ‘
B
’.
•
Remove the End Cover. The filter is a tight fit
over the outlet tube, remove it carefully to
prevent dust being dislodged.
•
Carefully pull the filter off the outlet tube and out
of the housing. Avoid knocking the filter against
the safety element and the housing.
With a clean cloth wipe the sealing surface on the outlet
tube. Dust on this will result in poor sealing and air
leakage. All contaminants must be removed before
installing the new filter.
Visually inspect the discarded filter for signs of leakage.
Streaks of dust on the
clean side of the filter
indicate
that there has been leakage.
Rectify any leaks before installing the new filter.
Fig.18
29