My Design Center
17
Extracting an Inner Outline for
Adding Decorative Stitching
The lines inside an open pattern can be extracted
to create an outline that can be used in My Design
Center. This setting can be used to fill the inside of
a pattern with stippling or decorative fills.
a
Select the pattern that decorative stitching
will be added around, and then press
in
the editing window.
b
Set “Inside” to “ON”, specify the distance
between the outline and pattern, then press
.
Additional Patterns
Six decorative fill patterns have been added.
Random Shift Function for
Decorative Fill Patterns
“Random shift” can be set to one of six levels.
“Type” settings have been added to the “Random
shift” settings for decorative fill patterns, increasing
the variations for changing the pattern.
a
Create a decorative fill pattern, and then
press .
Memo
• To complete the procedure, refer to
“Decorative Stitching Around a Pattern in
Embroidery (a Quilting Function)” in the
machine’s Operation Manual (Embroidery)
in the My Design Center section.
My Design Center
Note
• Patterns 031-036 of the decorative fill
patterns will be grayed out if KIT I has not
been certified.
