Embroidery
14
Then, align the inner corner of the pattern with the corner of the
reference lines.
d
When embroidering the last edge part
Use the move pattern keys to align the start point projected by
the projector with the end point of the previous pattern, and
then press
.
Then, align the end point of the part with the start point of the
first part. If the pattern is not angled correctly, rotate it. If the
length of the pattern does not match, enlarge or reduce the
pattern.
After making adjustments, press
.
Adjusting the Density of Scanned
Images
The density of the background image displayed
when scanning the fabric hooped in the
embroidery frame can be adjusted.
a
Press
, and then press
to scan the
fabric.
Note
• The width of the corner segment can be
adjusted to best fit the inner corner.
However, make adjustments so that the
shape is not deformed.
Memo
• If you need to restitch a segment or skip a
segment, you can press
in the
embroidering screen to continue to the next
pattern or return to the previous pattern.
Select the desired pattern in the
embroidering order, and then press
.
a
Return to the previous pattern.
b
Embroidering order of current pattern/Total
number of segments
c
Continue to the next pattern.
Memo
• For details on the procedure, refer to
“Display the Fabric While Aligning the
Embroidering Position” in the machine’s
Operation Manual (Embroidery).
a b c
