Printer Setting Tool
37
3
3 Device settings
Specify Tape Creator device settings,
such as power settings and print settings.
4 Exit
Closes the window.
c
Check that the Tape Creator to be
configured appears beside [
Printer
]. If a
different printer is displayed, select the
desired Tape Creator from the drop-
down list.
NOTE
If only one Tape Creator is connected, it is
unnecessary to make a selection since
only that machine will appear.
d
Click the button for the settings to be
specified, and then specify or change
the settings in the dialog box that
appeared.
For more information about the settings
dialog boxes, see
on page 37 or
e
After changing the settings, click
[
Apply
] - [
Exit
] in the settings dialog box
to apply the settings to the Tape
Creator.
f
Click [
Exit
] in the main window to finish
specifying settings.
Communication
Settings for Windows
®
3
Using [
Communication settings
] in the
“
Printer Setting Tool
” when connected to
the machine with a USB cable, you can set or
change the network communication settings.
Not only can you change the communication
settings for one Tape Creator, but you can
also easily apply the same settings to multiple
Tape Creators.
Settings Dialog Box
3
Current Status Dialog Box
3
TCP/IP (Wired) Dialog Box
3
Use the “
Printer Setting Tool
” to
configure the machine only when the
machine is in standby. The machine
may malfunction if you attempt to
configure it while it is handling a job.
5
6
4
7
8
3
2
1
9
10
11
12
3
2
1
4
7
8
Summary of Contents for TP-M5000N
Page 67: ...Printed in China LNA699001 ...