4
For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.
a
Attach the material (to which the foil is to be applied) to
the low tack adhesive mat, and then load the mat.
• If a highly adhesive mat is used, the material may be damaged
when it is peeled off.
• Attach the material so it does not extend from the attaching
area of the cutting mat.
b
Set the elevation lever on the left side of the machine to
the "2" position.
c
Download the Foil pattern from CanvasWorkspace.
• Good foiling results may be difficult to achieve with extremely
small or complicated patterns.
d
Retrieve the pattern on the cutting machine.
Retrieving the Foiling Pattern on the Machine